A
Model A2FM Axial Piston Hydraulic Motor
The hydraulic motor A2FM125/61W-VSD600 is an executive component of a hydraulic system, which converts the liquid pressure provided by the hydraulic pump into the mechanical energy of its output shaft. It has the advantages of small volume, light weight, simple structure, good processability, insensitivity to oil pollution, strong impact resistance, and small moment of inertia. Its disadvantages are large torque fluctuations, low efficiency, small starting torque, and poor low-speed stability.
Characteristics of REXROTH Hydraulic Motor A2FM Series
Suitable for both walking machinery and industrial fields.
The oil output rate depends on the pump flow rate and motor displacement.
The output torque increases with the increase of the difference between the high and low sides of the motor and the increase of the motor displacement.
The displacement design has been carefully selected, and its specifications meet various practical application scenarios.
There is a very high power density.
Compact design.
Overall high efficiency.
Has good startup performance.
Economic concepts.
A one piece plunger with a plunger ring.
REXROTH Hydraulic Motor A2FM Characteristics
The oblique axis structure axial piston variable motor is suitable for static pressure drive in both closed and open circuits;
Through a wide adjustment range, the frequency converter can meet the requirements of high speed and high-power frequency converters.
The combiner between Vgmax and Vga=0 can be infinitely adjustable.
The output speed is directly proportional to the flow rate and inversely proportional to the displacement.
Wide adjustment range, tilt axis swing angle range.
Multiple controls.
Due to the absence of a gearbox, a compact power to weight ratio can be adopted.
Equipped with a long-life bearing system, good starting characteristics, low inertia, and low noise.
Address: Shenghua Industrial Park, Xincheng 12 road, Dongxihu District, Wuhan, China
Phone: +86-18908655554
WhatsApp: +86-18908655554
Email: service@xlf-hydraulic.com