REXROTH Axial Piston Pump A6VM80 A6VM160 A6VM200 A6VM250 A6VM355 A6VM500 Motor

The application scope of plunger pumps: plunger pumps are generally used in machine tools, metallurgy, forging, and mining

3. OEM available

4. Fast delivery

The fixed displacement motor A2FM of axial piston, bent axis design is made suitable for hydrostatic drives in open circuits.

Output flow is proportional to drive speed and displacement.

These motors are suitable for use in mobile or industrial applications. The drive shaft bearings are designed to give the

service life expected in these areas of operation.

Careful selection of the displacements offered, permit sizes to be matched to practically every application.

- Favorable power / weight ratio

- Compact and economic design

- Optimum efficiency

- One piece pistons with piston rings

- Patented cylinder block drive system

The plunger pump is a major device in the hydraulic system. It relies on the reciprocating movement of the plunger in the cylinder body to change the volume of the sealing operation chamber to achieve oil suction and pressure. Plunger pumps have the advantages of high rated pressure, compact structure, high efficiency, and convenient flow regulation. They are widely used in high-pressure, high flow, and flow demand regulation situations, such as hydraulic presses, engineering machinery, and ships. plunger pump is a type of reciprocating pump, classified as a volumetric pump. Its plunger is driven by the eccentric rolling of the pump shaft and moves back and forth. Its suction and discharge valves are both one-way valves. When the plunger is pulled out, the pressure inside the work chamber decreases and the outlet valve closes. When it is lower than the inlet pressure, the inlet valve opens and liquid enters; When the plunger is pushed inside, the pressure in the working chamber increases, and the inlet valve closes. When the pressure is higher than the outlet pressure, the outlet valve opens and the liquid is discharged. When the drive shaft drives the cylinder body to rotate, the swash plate pulls or pushes the plunger back from the cylinder body, completing the oil suction and drainage process. The oil in the working chamber composed of the plunger and cylinder hole is respectively connected to the suction and discharge chambers of the pump through the oil distribution plate. The variable organization is used to change the inclination angle of the swash plate, and the pump displacement can be adjusted by adjusting the inclination angle of the swash plate. German A8VO plunger pump importer