Home » Hydraulic Products » Hydraulic pump » Axial Plunger pump » XLF-PD Axial Piston Fixed Pump Pressure max 450 bar Flow rate 5 to 1000

XLF-PD Axial Piston Fixed Pump Pressure max 450 bar Flow rate 5 to 1000

Quantity:
Warranty:	1 year
Availability:





Inquire Add to Basket

Model:
PD
Brand:
XLF
Code:
00001

Product Description

|

Product technical data

XLF-PD Axial Piston Fixed Pump Features

- Fixed pump with axial tapered piston rotary group ofbent-axis design, for hydrostatic drives in an open circuit

- For use in mobile and stationary applications- The flow is proportional to the drive speed and displacement

- The drive shaft bearings are designed for the bearing servicelife requirements usually encountered in these areas

- High power density

- Small dimensions

- High total efficiency

- Economical design

- One-piece tapered piston with piston rings for sealing

|

XLF-PD Axial Piston Fixed Pump Product detail picture

PD (2)

PD (3)

PD (4)

|

Application Video

|

XLF-PD Axial Piston Fixed Pump Technical data

Technical Data
Model	P1/PD 018	P1/PD 028	P1/PD 045	P1/PD 060	P1/PD 075	P1/PD 100	P1/PD140
Maximum Displacement,cm/rev cu.in,/rev	18 1.10	28 1.71	45 2.75	60 3.66	75 4.58	100 6.01	140 8.54
Outlet Pressure -Continuous,bar psi	280 4000
ntermittent,bar psi	320 4500
Peak,bar psi	350 5000
P1 Maximum Speed-Boosted Inlet,rpm	3200	3200	3000	2800	2700	2500	2400
P1(1.0 bar abs inlet),rpm	3200	3200	2600	2500	2300	2100	2000
P1 (0.8 bar abs inlet),rpm	2700	2800	2200	2000	1900	1800	1800
PD Maximum Speed (1.0 bar abs inlet),rpm	1800
PD (0.8 bar abs inlet),pm	1800
Minimum Speed,pm	600
nlet Pressure -Maximum,bar psi	10(gage 145
Rated,bar psia	1.0 absolute (0.0 gage 14.5
Minimum,bar psia	0.8 absolute (-0.2 gage 11.6
Case Pressure -Peak,bar	4.0 absolute (3.0 gage and less than 0.5 bar abovo inlot pressure
Raled,ba	2.0 absolute(1.0 gage and less than 0.5 bar above inlet pressure
Fluid Temperature Range,"C F	40 to +95 40 to +203
Fluid Viscosity -Rated,cS	6 to 160
Max.Intermittent,cSt	5000 (for cold starting
Min.Intermittent.cS	5
Fluid Contamination -Rated,ISO	20/18/14
Maximum.IS	21/19/16
SAE Mounting -Flange	82-2(A	101-2(B	101-2 (B)	127-2(C)or 127-4 (C)		127-4(C)	152-4(D
ISO Mounting-Flange	80 mm	100 mm	100 mm	125 mm	125 mm	125 mm	180 mm
SAE Keyed Shafts	19-1.A	25-1,BB	25-1,BB	32-1,C	32-1,C	38-1,CC	44-1,D
SO Keyed Shafts	20 mm	25 mm	25 mm	32 mm	32 mm	40 mm	50 mm
SAE Soline Shatts	9T.A 11T,A	13T.B 15T.BB	13T,B 15T,BB	14T,C	14T,C	17T,CC	13T,D
Weight -End Port,kg(lb	13.4 (29.5)	17.7 (39.0)	23(50)	29 (64)	30 (66	51 (112	66(145)
Side Port,kg(b	14.2 (31.3)	18.1 (40.0)	24 (52)	30 (67)	31 (68)	53(117)	67(147
Thru-Drive,kg (lb)			27 (59)	34(75)	35(77	55(121)	82(180)
Intermiltent pressure is defined as less than 10%of operation time,not exceeding 6 successive seconds